|Please click on the security bar above to allow pull-down buttons|
Here is a deal on our old P2XL boards you will need one master board and at least one slave board to make a 2 lane timer. You can have up to 3 slave boards with this master, for a 4 lane timer. You will need to wire a sensor/power cable, it is the same as the left cable on a P1 cheap kit, check the link below for the wiring instructions. All of these boards are assemble, unlike the P1 cheap kit.
We will include the ribbon cables, and sensors, but you will have to solder them to the ribbon cable like in the P1 cheap kit.
Master Board with cables $30
Slave board $20
Only 30-day warrenty on these items
- Cannot be upgraded to work with a computer