- Timer has .8" LED
display and shows individual times from start to finish to the thousandth of a
second.
- With SOF option, will alternate from individual times to sequence
-of-finish.
- Can be used without a computer
- Will send actual times of
your race to your computer with the optional Computer Serial Interface (PS)
- Has 8 different upgradable options to use with a computer.
Custom made to measure for tracks from 1 to 6 lanes
Available
completely assembled or as a kit NOTE - To run Race Management Software with this timer,
you must have the Computer Serial Interface (PS)
The K3 Kit
The timer kits are a low
cost alternative to a fully assembled timer. The kit includes all the hardware
that you need to build a professional looking finish line display. The
electronics come fully assembled and it just requires carpentry skills to
complete the timer. It requires you to drill the plastic to a printed template
that we give you and then drill the aluminum pieces to your own track
measurements. We supply you with detailed instructions for building the timer -
all you need is the tools and some time. We still custom build the kit to the
track so we need your lane measurements (like we do with an assembled timer).
The kit assembly takes about 2-3 hours to complete.
Picture of a kit
|
# of Lanes |
1 |
2 |
3 |
4 |
5 |
6 |
|
K3 |
$230.00- |
$265.00 |
$300.00 |
$335.00 |
$370.00 |
$405.00 |
|
K3K (kit) |
$170.00 |
$200.00 |
$230.00 |
$260.00 |
$290.00 |
$320.00 |
The Computer Data Options
The K3 Timer may include
any of the following programed options.
If you order all these options
when you order your K-3 Timer, the cost will be only $95.00!! If you wait and
upgrade later, each item will cost the amount on the chart below.
|
PS |
Serial Race Data |
Sends the actual time race data from the Micro Wizard timer to the computer, or Remote Time Display. The PS comes with a Remote Start Switch, the USB to Serial converter 40 foot serial cable and some simple data display software. This option is very useful if you use a Race Management Software package package like Derby Master, Grand prix Race manager or Race tender. |
$40.00 |
|||
|
KM |
Mask Lanes |
This command will disable any unused lanes - useful when all lanes are not being used. |
$10.00 |
|||
|
KR |
Reverse Lanes |
This command reverses the data stream sent from our timer. Some race management software will require the data sent from the timer in reverse lane order. This can also be used with our Remote Time Display to make a double-faced timer at the end of your track. |
$10.00 |
|||
|
PE |
Eliminator |
Great for elimination races. Sets the timer to score only a first and second place for a pair of lanes. Lets you run three separate races simultaneously on a 6-lane track, or two separate races simultaneously on a 4-lane track. |
$20.00 |
|||
|
KF |
Force Print |
Forces the timer to end the race and send the results of all lanes that have finished. This is a great feature for when a car crashes, burns and falls off the track. |
$10.00 |
|||
|
KL |
Reset Laser |
When the race is over, you can actually reset the laser gate from your computer! Does nothing if you do not have a laser gate. |
$10.00 |
|||
|
KC |
Count Down Clock |
Enter the minutes from which the timer wil count down. Click the"set countdown time" button and watch it go! Nice feature to show the intermission length between race events. |
$10.00 |
|||
|
SOF |
Sequence of Finish |
Will let your timer display alternate between actual times and sequence of finish |
$20.00 |
|||
|
K3O |
All Options |
Special price for all the K2 options when ordered at the same time as the timer |
$95.00 |
|||
|
All of these options are included, as well as the laser gate, in the K3 Grand Prix Package. A great deal! |
||||||
SC - Extra PS cable for the K-Series Timers
Extra
40foot long cable to use in addition to the 40 foot cable that comes with the
PS option for the K-Series timers.
$15
CSS or CSL - Case for your Fast Track
Timer
Durable high-impact black plastic. Foam lined.
Picture of Cases
CSS - $50, CSL - $75.00